|
|
Cemforce: An open-textured reinforcing 4mm x 4mm mesh fabric, made of polypropylene strands and fibres.
Designed for use with cement matrices. It's totally inert to alkalinity of cement and has an extended fibrous interface area with which the cement matrix can interact and mechanically bond.
The Cemcrete mixes are specifically formulated to form part of the CemForce, similar to fiberglass and resin.
Available in 1m widths up to 100m lengths
|
CemLam: A tightly woven polypropylene tape with a 4mm x 4mm mesh fabric made of polypropylene strands and fibres, laminated by hot extrusion to form a tough, waterproof substrate.
It is totally resistant to the alkalinity of cement and offers extended fibrous interface on the strands with which the cement matrix can mechanically bond. The cement matrix is specially formulated to form part of the CemLam to act like fiberglass and resin.
Available in 1.6m widths up to 100m lengths.
|
|
Glass Fibre Mesh: A treated 4mm x 4mm glass-fibre mesh used exclusively with Base Coat onto polystyrene surfaces as part of the Exterior Insulation Finishing System (EIFS).
It is alkaline resistant and improves impact resistance and firmness in conjunction with thin skim plasters.
Available in 1m widths up to 50m lengths.
|
Polyester Membrane: A tightly woven membrane used exclusively in conjunction with the Roofseal system. Not suitable for cement matrices.
Available in 100mm, 200mm and 300mm widths up to 10m lengths or 1m widths up to 100m lengths.
|
|
Polypropylene Membrane: A geotextile which has a random arrangement of fibres ensuring uniform strength and flexibility in all directions.
It's alkali resistant properties enable it to be used in conjunction with Portland cement-based slurries in water containing structures to seal over cracks and joints. Used in conjunction with Permastop or Flexbond cement slurries fro waterproofing reservoirs etc.
Available in bulk or cut in 10m x 100mm strips.
|
|
|
Cemcrete Products 
