Pool Sealer

Description
An inexpensive sealer for treating leaking pools where seepage is through general porosity or thinness of the plaster. Pool Sealer will not seal plumbing leaks or structural cracks.

Application
1. Put the lever of your sand filter to a position which allows the water to circulate without passing through the filter.
2. Add 25 litres of Cemcrete Pool Sealer evenly over the surface of the pool and stir in using the pool brush on a long handle.
3. Let the filter run for about one week as described in 1 above. During this time brush the floor of the pool frequently to keep the sealer in circulation. It is heavier than water and tends to settle.
4. After one week switch off the filter and allow the sealer to settle on the floor over a period of two days.
5. Now, using the vacuum brush, vacuum to waste, moving the brush very slowly along the bottom.
6. Repeat the vacuuming to waste the following day.
7. Move the filter lever back to the filter position and resume filtering and chemical dosing in the normal way. If, after this treatment, the level of the water still drops, the problem will be other than fine seepage; possibly structural cracks or leakage in the piping system, in which case the pool will have to be emptied for a full investigation.

Coverage
25 litres/75 000 litre pool.

Packaging
Supplied in 25 litre non-returnable drums.