WHAT IS CEMCOTE?
A finely ground mixture of white Portland cement, pigments and chemicals. It is supplied in powder form requiring mixing with water on-site to produce a smooth, flowing coating which sets rock hard.
A finely ground mixture of white Portland cement, pigments and chemicals. It is supplied in powder form requiring mixing with water on-site to produce a smooth, flowing coating which sets rock hard.
PRODUCT INFO
-
DETAILS
-
SYSTEM
-
USES
-
DOWNLOADS
-
VIDEO
-
FAQ
<
>
Benefits
- For interior and exterior use
- Trowel-on or brush-on application (See CemCote Brushed)
- Durable and weatherproof
- Interesting colour variation
- Wears well over time
Specifications
Suitable Surfaces |
Interior & exterior plastered or previously painted walls |
Finish |
Smooth |
Thickness |
1.6mm |
Application |
Trowel-on |
Packaging |
5kg & 25kg containers |
Coverage |
1-1.1kg per m² or 25-30m² (2 coats) per 25kg container Depending on surface texture and porosity |
Curing |
Initial set - 1 hour The completed work should be allowed to air cure for 24 hours after application, before mist spraying the entire wall from bottom to top (to prevent run marks) evenly at least twice during the day thereafter The moisture in the substrate must be less than 5% prior to sealing. |
Colour/s |
Available in 14 colours |
What do you need?
Tools & Consumables
|
Products
|
The System
When using polystyrene as a base, the polystyrene first needs to be coated with either Cemcrete’s BaseCoat - Paste or EIFS BaseCoat, depending on the application, while embedding a membrane (also available from Cemcrete) into the BaseCoat.
Please consult with your area representative for further technical and application details.
Q: What is the difference between CemCote Skimmed and SatinCrete?
A: CemCote Skimmed is a micro coating of only 1.6mm thick and SatinCrete is a 2 - 3mm thick coloured plaster. CemCote Skimmed can be used for interior and exterior applications and SatinCrete only for interior applications.
Q: Can my builder do the application?
A: If your painter has experience working with Cemcrete products and you feel confident in using them to do the application, then yes. Your painter can also attend our demo days hosted at our Academy in Johannesburg. Please note attending these demonstration days does not mean your painter will be an experienced Cemcrete contractor. For more details of Cemcrete’s demo days or independent contractor details visit the contact us page.
Q: Do you have to seal a CemCote wall?
A: The use of a sealer is highly recommended. Either SiliconSeal on its own or as a primer for a topical sealer. The moisture in the substrate must be less than 5% prior to sealing. Ensure that the surface is free of any form of laitance or dust etc. before sealing with a suitable sealer fit for purpose in accordance with the manufacturer’s instructions. Sealers are best applied to a cool surface in multiple thin coats until an even sheen is achieved. Allow sufficient drying time between coats (product specific in accordance with the manufacturer’s instructions). Cemcrete manufacture a wide range of sealers designed for a specific purpose, dry film thickness and durability; (example: for use in wet areas etc). Please contact your local representative for the best solution to meet your needs.
A: CemCote Skimmed is a micro coating of only 1.6mm thick and SatinCrete is a 2 - 3mm thick coloured plaster. CemCote Skimmed can be used for interior and exterior applications and SatinCrete only for interior applications.
Q: Can my builder do the application?
A: If your painter has experience working with Cemcrete products and you feel confident in using them to do the application, then yes. Your painter can also attend our demo days hosted at our Academy in Johannesburg. Please note attending these demonstration days does not mean your painter will be an experienced Cemcrete contractor. For more details of Cemcrete’s demo days or independent contractor details visit the contact us page.
Q: Do you have to seal a CemCote wall?
A: The use of a sealer is highly recommended. Either SiliconSeal on its own or as a primer for a topical sealer. The moisture in the substrate must be less than 5% prior to sealing. Ensure that the surface is free of any form of laitance or dust etc. before sealing with a suitable sealer fit for purpose in accordance with the manufacturer’s instructions. Sealers are best applied to a cool surface in multiple thin coats until an even sheen is achieved. Allow sufficient drying time between coats (product specific in accordance with the manufacturer’s instructions). Cemcrete manufacture a wide range of sealers designed for a specific purpose, dry film thickness and durability; (example: for use in wet areas etc). Please contact your local representative for the best solution to meet your needs.