WHY USE A SEALER?
Protecting cement walls with a good quality Cemcrete sealer is crucial and not only makes the surface easier to clean, it offers other benefits as well, such as enriching the colour intensity of the overlay, blocking the penetration of stains, and improving water repellency and abrasion resistance.
Protecting cement walls with a good quality Cemcrete sealer is crucial and not only makes the surface easier to clean, it offers other benefits as well, such as enriching the colour intensity of the overlay, blocking the penetration of stains, and improving water repellency and abrasion resistance.
SEALER PRIMER | Acrylic co-polymer (water-based)
Description |
Sealer primer to pre-seal cementitious surfaces prior to applying the final sealer of your choice. Provides a tough, clear priming system for sealers onto decorative cement coatings, concrete, cement plaster, & masonry. It reduces the porosity ensuring better sealer application. |
Benefits |
|
Packaging |
1, 5 & 20 litre containers |
Coverage |
Approximately 5 - 6m² per litre per coat |
Curing |
Initial set: Solvents evaporate after 2 days plus Final cure: 14 days |
Finish |
White - dries transparent |
MULTIPURPOSE WATER-BASED SEALER | Non-yellowing clear polymer sealer
Description |
A clear polymer emulsion that provides a tough, durable coating on vertical surfaces of concrete, cement plaster & masonry. |
Benefits |
|
Finish |
Transparent Gloss or Super Matt |
Packaging |
1, 5 & 20 litre containers |
Coverage |
Approximately 5 - 6m² per litre per coat |
Curing |
Initial set: 4 hours Final cure: 3 days |
SILICONSEAL SOLVENT-BASED SEALER | Penetrative sealer (Wet-on-wet application)
Description |
A colourless, water-based, low viscosity, penetrating liquid for hydrophobic infusing & priming of mineral surfaces. When applied to mineral substrates, it will reduce the capillary absorption of the substrate which it has penetrated but does not clog pores or capillaries. There is therefore little or no impairment of the building material’s ability to “breathe”. |
Benefits |
|
Finish |
No colour or sheen effect on surface |
Packaging |
1, 5 & 25 litre containers |
Coverage |
Face bricks - 6m²/litre Porous bricks - 3m²/litre Concrete - 4m²/litre |
Curing |
Initial set: Solvents evaporate after 2 days plus Final cure: 22 days |
SILICONSEAL WATER-BASED | Penetrative waterproofing system
Description |
A milky white, water-based, low viscosity, penetrating liquid for hydrophobic infusing & priming of mineral surfaces. When applied to mineral substrates, it will reduce the capillary absorption of the substrate which it has penetrated but does not clog pores or capillaries. There is therefore little or no impairment of the building material’s ability to “breathe”. |
Benefits |
|
Finish |
Milky white liquid which dries clear |
Packaging |
1, 5 & 20 litre containers |
Coverage |
Face bricks - 6m²/litre Porous bricks - 3m²/litre Concrete - 4m²/litre |
Curing |
Initial set: 2 to 3 days depending on the weather to allow the water to fully evaporate Final cure: 14 days |