WHAT IS MATCRETE?
Waterproof cement lining that can be applied directly onto hard compacted soil for the cost-effective creation of any water-containing structures such as fish ponds, water channels, dams, drinking troughs, relining of pipes, repair of old cracked reservoirs, flat roof waterproofing, parapet waterproofing etc.
Waterproof cement lining that can be applied directly onto hard compacted soil for the cost-effective creation of any water-containing structures such as fish ponds, water channels, dams, drinking troughs, relining of pipes, repair of old cracked reservoirs, flat roof waterproofing, parapet waterproofing etc.
PRODUCT INFO
Benefits
- Thin cement linings can be formed in-situ
- Can be reinforced with as many layers of CemForce as necessary for strength required
- Ready to use with the addition of FlexBond solution only
- Not only waterproof, but vapour proof as well
- Fish and plant friendly
- Cost-effective creation of water-containing structures
- Can be applied directly onto hard compacted soil
Specifications
Suitable Surfaces |
Applied directly onto hard compacted soil Cement or concrete based water channels, dams, drinking troughs, reservoirs, flat roofs, parapets |
Finish |
Rough textured Can be smooth trowelled |
Thickness |
|
Application |
Brush-on |
Packaging |
40kg bags |
Coverage |
Approximately 6m² per 40kg bag |
Curing |
Allow finished work to air cure for three days before filling with water |
Colour/s |
Available in 3 colours |
What do you need?
|
Tools & Consumables
|
The System
Q: Will MatCrete stick to plastic, rubber or gypsum plaster?
A: No.
Q: How soon after the MatCrete application can I place the fish or plant life back into the pond or dam?
A: If fish or plant life is to be put back into the pond, the water should be circulated through the necessary filters and UV lights for at least 7 to 10 days. Once this has been done, the water should be tested before fish or plants are introduced back into the water.
Q: Can I tile on top of a flat roof that I’ve waterproofed using MatCrete?
A: Yes. You could use a two-pack epoxy to bond and seal between cured MatCrete and other materials.
A: No.
Q: How soon after the MatCrete application can I place the fish or plant life back into the pond or dam?
A: If fish or plant life is to be put back into the pond, the water should be circulated through the necessary filters and UV lights for at least 7 to 10 days. Once this has been done, the water should be tested before fish or plants are introduced back into the water.
Q: Can I tile on top of a flat roof that I’ve waterproofed using MatCrete?
A: Yes. You could use a two-pack epoxy to bond and seal between cured MatCrete and other materials.