WHAT IS SATINCRETE?
SatinCrete is a 2-3mm pigmented, cement-based decorative plaster that creates a smooth, coloured finish for interior use only.
SatinCrete is a 2-3mm pigmented, cement-based decorative plaster that creates a smooth, coloured finish for interior use only.
PRODUCT INFO
Benefits
- Stunning interior mottled wall coating
- Ideal for bathroom walls, including shower walls
- Once sealed, easy to clean and maintain due to its smooth finish
- Versatile application: can be applied to counter tops and vanities
Specifications
Suitable Surfaces |
Wood floated plaster Fibre cement board, new dry walling, previously painted surfaces and polystyrene all need to be primed with CemBond and coated with Cemcrete’s EIFS BaseCoat |
Finish |
Smooth finish Or sponge, brush or combed finish |
Thickness |
2-3mm |
Application |
Trowel-on |
Packaging |
20kg bags |
Coverage |
Approximately 3-4m² per 20kg bag |
Curing |
Initial set: 1.5–2 hours Leave to air cure for at least 24 hours before moist curing with a light mist spray of water at least 3 times during the day. Always spray from bottom to top to avoid water run marks. Allow to dry for at least 3 days before sealing The moisture in the substrate must be less than 5% prior to sealing |
Colour/s |
Available in 13 colours |
What do you need?
|
Tools & Consumables
|
Products
|
The System
|
BUILT-IN BATH & WALL
SatinCrete Beach Sand was used to coat the built-in bath and wall.
|
CEILING
SatinCrete can be used to coat concrete or suspended ceilings to give a mottled effect.
|
|
VANITIES
Vanities and countertops can be coated with SatinCrete.
|
SEATING, COUNTER & WALL
Built-in seating, counter and wall was created using SatinCrete Clay.
|
Please consult with your area representative for further technical and application details.
Q: Can I use SatinCrete in my shower?
A: Yes, however you have to seal your fully cured SatinCrete wall to make it completely waterproof.
Q: Can I apply SatinCrete over tiles?
A: No, the weight of the plaster coating is too heavy and could delaminate the tiles. We would recommend rather removing the tiles before applying SatinCrete.
Q: Can I apply SatinCrete on a floor?
A: No, however Cemcrete offers a range of floor products that can be used in conjunction with SatinCrete.
Q: Can I apply SatinCrete to a previously painted wall?
A: Yes, as long as the paint is in a good condition and not peeling or flaking. To prepare the previously painted wall follow the following preparation steps.
Q: Can I patch a SatinCrete wall?
A: We recommend rather recoating an entire area as patching will lead to colour variances on the wall.
Q: Can my plasterer do the application?
A: If your plasterer has experience working with Cemcrete products and you feel confident in using them to do the application, then yes. Your plasterer can also attend our demo days hosted at our Academy in Johannesburg. Please note attending these demonstration days does not mean your plasterer will be an experienced Cemcrete contractor. For more details of Cemcrete’s demo days click here, or independent contractor details, click here.
A: Yes, however you have to seal your fully cured SatinCrete wall to make it completely waterproof.
Q: Can I apply SatinCrete over tiles?
A: No, the weight of the plaster coating is too heavy and could delaminate the tiles. We would recommend rather removing the tiles before applying SatinCrete.
Q: Can I apply SatinCrete on a floor?
A: No, however Cemcrete offers a range of floor products that can be used in conjunction with SatinCrete.
Q: Can I apply SatinCrete to a previously painted wall?
A: Yes, as long as the paint is in a good condition and not peeling or flaking. To prepare the previously painted wall follow the following preparation steps.
Q: Can I patch a SatinCrete wall?
A: We recommend rather recoating an entire area as patching will lead to colour variances on the wall.
Q: Can my plasterer do the application?
A: If your plasterer has experience working with Cemcrete products and you feel confident in using them to do the application, then yes. Your plasterer can also attend our demo days hosted at our Academy in Johannesburg. Please note attending these demonstration days does not mean your plasterer will be an experienced Cemcrete contractor. For more details of Cemcrete’s demo days click here, or independent contractor details, click here.